福建北部近岸东台山岛火山岩形成时代、地球化学与古太平洋板块俯冲的响应          下载免费PDF全文

王飞飞  张勇  韩宗珠  宋维宇  吴浩  宁泽 《中国地质》2020,47(5):1426-1437

福建北部沿岸岛屿岩石组合以晚中生代火成岩为主，研究认为是古太平洋俯冲消减的产物，对反演洋盆构造演化具有重要的指示意义。本次对其中的福建北部海域东台山岛上广泛发育的酸性火山岩进行了锆石U-Pb定年以及全岩主微量地球化学分析工作。2件年代学样品分别获得了92 Ma和86 Ma的锆石U-Pb年龄，确定东台山岛火山岩形成于晚白垩世。全岩地球化学特征指示火山岩样品以酸性钙碱性岩石为主，整体富集Rb、Ba等元素，亏损Nb、Ta、Sr、Eu等元素，显示弧型岩浆岩的地球化学组成。研究认为东台山岛火山岩起源于古老下地壳变沉积岩熔融，并在浅层岩浆房内经历了不同程度的结晶分异过程。结合区域上晚中生代岩浆作用由陆向海的时空迁移特征，福建北部沿岸岛屿火山岩形成的深部动力学机制应该与古太平洋俯冲过程中的板片回转过程相关。  相似文献   

钻探参数实时采集系统研制与应用          下载免费PDF全文

汤小仁  孟义泉  訾兵  梁日旺 《探矿工程》2020,47(6):46-53

钻探参数实时采集系统研制的目的是向钻探技术及管理人员提供直观的钻探实时参数，通过该系统可全天候的掌握钻探工况。钻探参数采集的方法是通过传感器采集压力、转速、位移、流量、液位等物理参数，使用配套的软硬件设备进行数据转换和处理，在人机交互界面显示直观的工程参数。该系统根据野外现场不同工作环境可以使用互联网、GPRS终端或者北斗卫星终端把现场实时工程数据无线传输至远程服务器上，用户通过手机或电脑即可查看到现场的实时或历史工程数据。采用本系统可以预防和减少钻探事故，为事故处理提供数据支撑，为实现钻探自动化、智能化提供基础数据。  相似文献   

胶东焦家断裂带蚀变岩非镜像对称特征及其地质意义     

张亮亮  马生明  朱立新  林少一  周明岭  徐忠华  王建 《大地构造与成矿学》2020,(2):276-288

焦家断裂蚀变带是胶东地区最重要的控矿构造之一。该断裂带控制的矿床是创立“焦家式”金矿理论的重要实例基础。目前,焦家断裂带累计探明Au资源储量超过1200 t,并且还在不断增加,展现了深部重要的勘查和研究价值。焦家断裂带控制的矿体主要赋存在主断面下盘,断裂带发育于花岗岩中时,上盘发育钾长石化花岗岩、绢英岩化花岗岩、黄铁绢英岩化花岗质碎裂岩、(黄铁)绢英岩质碎裂岩,下盘发育黄铁绢英岩质碎裂岩、黄铁绢英岩化花岗质碎裂岩、黄铁绢英岩化花岗岩和钾化花岗岩,蚀变类型在主断面两侧呈现对称分布特征。但是在岩性特征、结构构造、蚀变强度、化学成分等方面差异明显,表现出非镜像对称特征。上盘蚀变岩厚度大于下盘,下盘花岗岩的构造破碎程度比上盘花岗岩更严重;断裂带上盘黄铁矿含量低、一般无矿化显示,下盘黄铁矿含量高,出现金矿化;断裂带上盘的中生代花岗岩中韧性变形不发育,以脆性破裂为主,下盘发育明显的韧性变形;断裂带上下盘不同蚀变带的成矿元素Au,矿化剂元素S,成矿伴生元素Ag、Pb、Zn,亲石分散元素Ba、Sr以及主量元素Na2O、MgO含量具有差异性,指示焦家断裂带主断裂面两盘经历了不同的成矿作用过程,下盘花岗岩的热液蚀变作用与成矿作用的关系更为密切。依据焦家断裂带不同蚀变带元素的非镜像对称性特征,可利用上、下盘花岗岩和构造蚀变带的地球化学标志识别矿体或者不同蚀变带的位置,对认识“焦家式”金矿床的成因机制、预测深部成矿前景、指导深部找矿具有重要理论和实际意义。  相似文献   

中国深层地热能开采的地质条件评价     

庞忠和  罗霁  程远志  段忠丰  天娇  孔彦龙  李义曼  胡圣标  汪集旸 《地学前缘》2020,27(1):134-151

深层地热能是指深度大于3 000 m的地热能。我国深层地热能资源丰富,但是开采条件怎么样呢?本文基于地热地质学原理,结合岩石力学等相关学科的理论,提出一种对深层地热能开采条件进行评价的指标体系,对各单一指标采用专家打分的方法赋值,继而采用模糊数学定量计算和评估深层地热能资源开发的难易程度。该方法考虑了深层地热能开发利用中的增强地热系统(EGS)的环境安全问题,即传统的“刚性造储”可能带来的诱发地震等不利于地热能行业健康发展的因素,倡导“柔性造储”和广义EGS理念,强调储层属性和地物理场的整合,针对我国地热能分布与构造活动关系密切、地壳总体上活动性强、地应力高、地震频发等构造型地热特点,是对以往评价方法的补充和拓展。该方法充分利用了专家知识,发挥了模糊数学综合评估作用,给出的量化结果易于对比和使用,可以更好地支持决策。本文基于新的评估方法,利用现有的深部地热研究及勘探成果,评估了中国大陆地区九个区域深层地热能开发的难易程度,评价区包括西藏南北地堑系、云南西部火山型地热区、青海东部共和盆地以及东北、华北等。从本文的结果可以看出,我国深层地热能开采的地质条件复杂,开采难度较大。  相似文献   

大凌河河口地区中更新世晚期以来沉积环境演化     

商志文  李建芬  姜兴钰  李琰  王宏 《地质学报》2020,94(8):2433-2445

大凌河河口地区LZK06孔40m以浅岩心的沉积学、古生物学和年代学等综合研究以及该地区LZK02- 04钻孔资料，揭示了研究区中更新世晚期以来经历了两次海侵- 海退旋回，依次形成了中更新世晚期湖相/河流相 SymbolnB@ 晚更新世海相- 湖相/河流相 SymbolnB@ 全新世海相- 河流相地层。全新世早中期由于物源供给很少，研究区处于长达约10ka的饥饿滞留相沉积环境，平均沉积速率仅约0. 02~0. 05cm/a。全新世晚期约1500a cal BP以来，由于人类活动导致水土流失，河流输砂量增加，研究区开始了快速加积过程，平均沉积速率约0. 9~1. 2cm/a，下辽河平原被快速充填，开始成陆。与全球海面变化时空分布特征的对比，推断辽东湾的第II海相层发育于MIS 5- MIS 3早期，第I海相层发育于MIS 1阶段高海面时期。晚更新世以来频繁的海面升降是辽东湾泥质海岸带地层和环境演化的主要控制因素。  相似文献   

Sequence stratigraphic framework and sedimentary model of Shanxi Formation in northeast Zhoukou Depression of the North China Plate     

《China Geology》2020,3(4):575-590

The sequence stratigraphic framework of Shanxi Formation in the northeast Zhoukou Depression was established based on detailed sequence stratigraphical and sedimentological analysis by utilizing the logging and core data of six wells drilled in the eastern tectonic unit of Zhoukou Depression. It was divided into three third-order sequences, namely SQs1, SQs2, and SQs3 from bottom to top. Each sequence can be divided into a transgressive system tract (TST) and a highstand system tract (HST). Furthermore, four sequence boundaries and three maximum flooding surfaces were identified, and they are the bottom interface SBs and maximum flooding surface mfss1 of SQs1, the bottom interface SBs1 and maximum flooding surface mfss2 of SQs2, the bottom interface SBs3 and maximum flooding surface mfss3 of SQs3, and the top interface SBx from bottom to top. Carbonate tidal flat –clastic tidal flat sedimentary system developed in Shanxi Formation in the northeast Zhoukou Depression (also referred to as the study area) under the control of regression. Meanwhile, four sedimentary microfacies were identified in the sedimentary system, which are lime-mud flats, sand flats, mixed flats, and mud flats. The transgression in the study area occurred from the southeast to the northwest. Therefore, the northwestern part is the seaward side, and the southeastern part is the landward side. As revealed by relevant drilling data, SQs1 of the Shanxi Formation is characterized by the development of limestone and carbonaceous mudstone, with limestone, dark mudstone, and carbonaceous mudstone mainly developing. Meanwhile, lime-mud flats were mainly deposited in it. During the periods of SQs2 and SQs3, the sedimentary environment of the study area changed from the carbonate tidal flats to clastic tidal flats as the coastline migrated towards the sea. In these periods, sand flats mainly developed near the maximum flooding surfaces and were relatively continuous in the eastern and southern parts of the transgressive system tract; mixed flats were relatively continuous in the western and northern parts of the transgressive system tract as well as the eastern and southern parts of the highstand system tract; mud flats widely developed in the highstand system tract. Peat flats mainly developed in the period of HSTs2, with coal seams relatively developing in the southeastern part of the study area as revealed by drilling data. The peat flats in SQs2 are favorable hydrocarbon source layers, the lime-mud flats in SQs1 and sand flats formed in the transgression periods of SQs2 and SQs3 constitute favorable hydrocarbon reservoirs, and the mud flats form in the transgressions periods serve as favorable cap rocks. Therefore, the study area features a reservoir-cap assemblage for self-generating and self-storing of hydrocarbon, and the southeastern part of the study area can be taken as a favorable exploration area.  相似文献   

Assessing model of highway slope stability based on optimized SVM     

《China Geology》2020,3(2):339-344

Considering the geological hazards attributed to the highway slope, using a common simple model cannot accurately assess the stability of the slope. First, principal component analysis (PCA) was conducted to extract the principal components of six factors (namely, bulk density, cohesion, internal friction angle, slope angle, slope height, and pore water pressure ratio) affecting the slope stability. Second, four principal components were adopted as input variables of the support vector machine (SVM) model optimized by genetic algorithm (GA). The output variable was slope stability. Lastly, the assessing model of highway slope stability based on PCA-GA-SVM is established. The maximal absolute error of the model is 0.0921 and the maximal relative error is 9.21% by comparing the assessment value and the practical value of the test sample. The above studies are conducive to enrich the assessing model of highway slope stability and provide some reference for highway slope engineering treatment.  相似文献   

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province: Based on the breakthrough of 3000 m exploration drilling     

《China Geology》2020,3(3):385-401

Recently, continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China. Approximately 5000 t of cumulative gold resources have been explored in Jiaodong, which has thus become an internationally noteworthy gold ore cluster. The gold exploration depth has been increased to about 2000 m from the previous <1000 m. To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m, the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named “Deep drillhole ZK01” to a depth of 3266 m. Hence, as reported herein, the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented. ZK01 is, to date, the deepest borehole with an gold intersect in China, and constitutes a significant advance in deep gold prospecting in China. The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources, while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources. The Jiaojia Fault Belt tends to gently dip downward, having dip angles of about 25° and about 20° at vertical depths of 2000 m and 2850 m, respectively. The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing, alteration, mineralization, and tectonic type. The deep zones can generally be categorized from inside outward as cataclastic granite, granitic cataclasite, weakly beresitized granitic cataclasite, beresitized cataclasite, and gouge. These zones exhibit a gradual transitional relation or occur alternately and repeatedly. The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development; that is, the higher the pyrite content, the wider the veins and the higher the gold grade. Compared to the shallow gold ores, the deep-seated gold ores have higher fineness and contain joseite, tetradymite, and native bismuth, suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization. ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane (gouge) and hosted within the Linglong Granite, contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro. These new discoveries are particularly significant because they can help correct mineralization prospecting models, determine favorable positions for deep prospecting, and improve metallogenic prediction and resource potential evaluation.  相似文献   

琼东南盆地深水区松南-宝岛凹陷反转构造带发育特征及油气地质意义   总被引：1，自引：1，他引：0  

杨金海  杨希冰  周杰  甘军  宋爱学  江凡  杨璐 《海洋学报》2019,41(5):97-106

利用新三维地震资料对松南-宝岛凹陷反转构造带发育特征、形成期次进行研究，并从构造背景及力学机制两个方面探讨反转构造的成因机制。研究结果表明，松南-宝岛凹陷反转构造带主要发育一系列"上凸下凹"的大型褶皱背斜，伴生NWW向弱走滑断裂构造和NNW向张剪构造。反转构造及其伴生构造符合NEE右旋剪切应力场特征，形成时间与东沙运动一致，表明该反转构造带可能受晚中新世南海东北部东沙运动产生的右旋走滑应力场作用控制。反转构造有利于研究区圈闭的重建和改造，对琼东南盆地东部新区油气运移和重新优选分配的认识，具有重要的油气地质意义。  相似文献   

New Modes of Environmental Governance in Greater Sage-Grouse Conservation in Oregon     

Katherine Wollstein  Emily Jane Davis 《社会与自然资源》2020,33(5):555-573

Abstract

Natural resource challenges often span administrative jurisdictions and include actors and processes operating at different spatial and political scales. We applied concepts of new environmental governance to analyze Oregon’s approach to greater sage-grouse conservation. Through one in-depth case study in Lake County, we traced features of new environmental governance (cross-scale interactions, decentralization, and capacities of actors) through different governance levels. Interviews and qualitative analysis revealed that decentralization of administrative functions facilitated cross-scale interactions and relied on intermediaries, gap-filling, and perceptions of legitimacy at lower levels. State and agency guidelines steered the effort and were accompanied by financial and technical resources from multiple arenas, which increased local capacity. This study adds to the understandings of environmental governance for implementing multi-actor, multi-level conservation arrangements in resource-dependent communities. Further exploration of connections between higher levels and local contexts will reveal important, new ways to link policies with on-the-ground outcomes.  相似文献